| Phoenix |
 |
Naugahyde® continues its tradition in FR vinyl coated fabrics with Phoenix. This Naugahyde 2-200 Flame Blocker product is designed to be used in high fire risk public access installations. These include:
Contract Upholstery
- Hotel/Motel
- Restaurant
- Office
- Hair Salons
- Auditorium Seating
Institutional
- Hospital
- Nursing Home
- Dormitory
- Prison
Transportation
- Subway
- Train
- Bus Seating and Interiors
Phoenix combines state of the art technology with a full range of thirty colors designed to complement contract carpet, wallcovering and laminate products. Included in this palette are traditional, emerging traditional, and new hues to satisfy the designer's demand for color. Chairs upholstered with Naugahyde 2-200 Flame Blocker can meet the full-scale burn requirements of the Boston Fire Department Chair Test and those of California Technical Bulletin 133 under certain conditions. The following charts give typical results.
Flammability
Naugahyde 2-200 Flame Blocker is formulated to have smoke emission less than 200 (ASTM E-662) and to meet flammability requirements contained in these specifications:
- California Fire Regulation (Bulletin 117, Sec. E)
- Automotive (MVSS Ð302)
- BIFMA (Screen Test, Sec. 4.6.1.1)
- CID A-A-2950-A (Federal Standard 191A test method 5903) replaces CCC-A-680a
- Upholstery Requirements of FAR 25.853
- Port Authority of NY and NJ
This term and any corresponding data refer to typical performance in the specific tests indicated and should not be construed to imply the behavior of this or any other material under other fire conditions.
The Cal-133 test is highly dependent on chair construction and each specific construction must be tested for compliance. The above results were obtained on stack chairs with melamine polyurethane foams or HR Cal-117 foams and tub chairs with melamine polyurethane foams. Detailed test results are available upon request. Melamine polyurethane foams generally are preferred with Flame Blocker.
When used with melamine polyurethane foam or HR polyurethane foam which meets California bulletin #117 requirements. All data regarding Naugahyde 2-200 Flame Blocker fabric was obtained using specific test methods under controlled laboratory conditions to measure performance against codes and specifications. Details of test results are available upon request. While Uniroyal views the product as a significant improvement over existing technology, all organic materials will burn and generate smoke under some fire conditions.
®Naugahyde 2-200, is a registered trademark of Uniroyal Engineered Products LLC Naugahyde.
™Flame Blocker is a trademark of Uniroyal Engineered Products LLC Naugahyde. |
|
Product Features
|
 |
Sulfide stain resistant (hospitals, nursing homes, and hair salons) |
|
|
BeautyGard® protective finish |
|
|
Cleans easily with mild soap and water |
|
|
-20 °F cold crack |
|
|
54" wide |
|
|
Anti-static slip finish |
|
|
|
